기록보관소(준비중)
국민은행 - SLLAB
810101-04-059178

EAGLE - Control unit for telescopes and astrophotography
판매가격 :가격-상담
원산지 :Italy
제조사 :Primaluce LAB
상품분류 :자동화장비 [분류바로가기]
출시일 :2016-06-25
구매수량 :

EAGLE is the first control unit that allows you to control all telescopes and accessories used in astrophotography with a wireless connection! No more uncomfortable laptops or large batteries on the field: EAGLE is installed directly on your telescope (any brand), it controls and powers the accessories used in astrophotography you will control remotely from your smartphone, tablet or remote computer!


Designed specifically to make astrophotography easier and faster, EAGLE integrates a a computer running Windows Embedded 8.1 PRO (more stable and compact version than normal computers), a power bridge to manage all the connected devices, a WiFi system to remote wireless control, all that in a special aluminum case PLUS compatible that can be connected in various ways to your telescope, always with maximum rigidity.


In PrimaLuceLab we know that astrophotography can be complicated and, especially, to record weak objects with long exposures, the control computer and various electronic devices are the key. These instruments, however, make it complicated to setup the telescope in the field (often in isolated places with low light pollution) and to use, with many cables that may accidentally disconnect off during use! More, laptop computers have a high power consumption and thus they require large and heavy batteries to be powered for all the night.

EAGLE solves all these problems and make astrophotography easier and faster!


WHAT YOU CAN DO WITH THE EAGLE:

Control any mount using the planetarium software: thanks to SkyCharts software pre-installed on every Eagle, gone are the days of handbox limitations having now a great planetarium software to move in the night sky. Get access to millions of objects, all with a lot of data and point your telescope (compatible with mounts with ASCOM drivers) where you want, just by selecting the object you see on the screen! 

Remorely control the DSLR or CCD camera: install on the EAGLE the software for Windows included with the camera (not included in Eagle) you use for astrophotography and convert it into a wireless camera! You can watch the real-time image on the device that you use to control your EAGLE powered telescope, save it on Eagle or on a USB pen to import into the computer used to process the pictures!

Simply setup and use autoguide: EAGLE comes with the PHD2Guiding software pre-installed then it allows you to start autoguiding with many different cameras and mounts! Observes the image of the guide star and the correction chart, so you can verify the tracking accuracy of your mount for your long exposures astrophotography.

Extending functionality by installing new software: EAGLE uses the Windows operating system so you can expand its features in a very simple way, by installing the astronomical software you like, just like a regular computer.


EAGLE ADVANTAGES:

Easier to use: eliminates the need for an external computer. Since Eagle connects directly to the telescope and rotates with the mount while it track the stars in the sky, the problem of cables that can detach during astrophotography sessions is overpassed. USB and power cables will not come off accidentally as Eagle moves with the telescope!

More compatible: it allows remote control via Ethernet or WiFi from any device (smartphones, tablets, computers) with any operating system (iOS, OSX, Android, Windows). It's compatible with all software for astrophotography with any telescope, CCD cameras, guide cameras and computerized mounts.

More efficient: it manages the power for all telescope components and it reduces the size and weight of the batteries required for power up everything.

More stable: it uses a Windows Embedded 8.1 PRO operative system, lighter and more stable than the one found in traditional PCs but 100% compatible. It has no fan or moving parts so it doesn't introduces vibrations.

More portable: it is lightweight and compact, weighing only 950 grams and it integrates seamlessly into the PLUS system. If you don't you have a PLUS element or if you use other's brand telescopes, just add our "Vixen + Losmandy PLUS dovetail clamp" to the Eagle and connect it to the Vixen or Losmandy dovetail bar of your telescope.


Thanks to Eagle you won't need an external control computer (usually a notebook), a smaller and lighter battery will be sufficient and you will use much less cables (in the picture, with the optional ALL NIGHT 20A lithium battery). 






WHAT EAGLE EMBODIES:

a computer running Windows Embedded PRO 8.1, a more stable and compact version of the operating system found on most laptops. You can use Eagle with any already exists  astronomy software then you will not have to learn new software but simply install in the Eagle (like a normal computer) the one you already use: AstroArt, MaximDL, Nebulosity, PHD Guiding, etc. We optimized the Windows Embedded 8.1 PRO installation to have the operating system faster (Eagle is ready to use in just 35 seconds after pressing the ON button) and to maintain a better stability (to avoid the tedious crashes that often happen with normal computers even during astrophotography sessions).

Eagle has a motherboard with Intel® Atom™ processor, fast 4GB memory and fast 64GB SSD hard disk, everything needed to make the system run as fast as possible. Eagle has 5 USB ports (four USB 2.0 and one USB 3.0), Ethernet port and a HDMI port (so you can connect to an external monitor and use it - together with a USB mouse and keyboard -  as a desktop PC, for example to process the recorded images).


a power bridge, a more efficient way to manage all of the devices used in astronomy: you'll need a smaller field battery and you will not have all the power cables from every devices to the ground. Eagle has a separate 12V power that runs a current up to 14 amps: then, using a special internal board, it has 4 power out 12V ports to which you connect all the other devices. This way you can also power of your CCD camera, mount  guide camera or other accessories directly from the Eagle (using the special optional cables) avoiding the need for other power supply sources and reducing the number and length of cables.

In order to power all your devices, you will have only one cable that goes to the battery or the AC adapter: the one that connects to the Eagle. All the power ports are equipped with safety screw to prevent unwanted detachment of the cables or reverse polarity. 3 power out ports with 3 Amps fuse while the 4th power out port has 5 Amps fuse and it's designed for cooled CCD camera connections (since the cooling system usually needs for more power).


a WiFi control system: in order to run Eagle, you don't need mouse or keyboard: you can control it through a dedicated App, connecting via WiFi from any mobile device (tablet or smartphone) with any operating system (iOS, Android or Windows Mobile) or from another computer (Windows or Mac). It also has a network port for wired control (useful for remote control in fixed observatories). Turn the Eagle on, then turn on your device's WiFi connection and select the network that Eagle will create. Then activate the remote control App and you will have Eagle desktop on your device screen with all your software: the remote control App uses a special mode so you can use your finger on the touch screen as if it were a mouse in a simple and fast way. After setting the acquisition parameters and start the autoguider, you can launch the images recording and turn off the device: Eagle will automatically perform the session!

For your safety each Eagle device creates a different WiFi network from others Eagle (with different access password). In addition, in order to wirelessly control the Eagle you will have an access password that only you know (personally defined for every Eagle). This way you can use different Eagle once, for example during a StarParty. Eagle also has a network port for cabled control: you can for example use it for remote control of an observatory.


the PLUS aluminum case, rigid and lightweight: we designed the particular case (patent pending) to be both incredibly rigid, such as the support dovetail bars for telescopes, and to let you directly connect to any PLUS elements maintaining a perfect system rigidity and avoiding any flexure. As for all the other PLUS elements, Eagle's case has more M6 threaded holes to connect the other PLUS elements, every one with at least 2 M6 screws (in order to keep the system's rigidity). For example, it can be placed between the PLUS support rings and guiding rings perfectly integrated into the telescope. Thanks to great case's rigidity, you can directly install the PLUS guide rings on the case to support, without flexures, guide telescopes up to 3 Kg. In this way you can easily transport the telescope with Eagle, guide scope and guide camera, everything already installed, greatly reducing the time it takes to prepare your setup for astrophotography!

Don't you have a PLUS element or do you use other's brand telescopes? Just add our "Vixen + Losmandy PLUS dovetail clamp" to the Eagle and connect it to the Vixen or Losmandy dovetail bar of your telescope! This way you can install it where you want, keeping a perfect weights balance, a key aspect in long exposure astrophotography.


Eagle can be installed beetween support and guide rings (left), connected to a Vixen or Losmandy type dovetail bar using the optional Vixen + Losmandy PLUS dovetail clamp (center) or, in case of telescopes with long dovetail bars, it can be connected on the Vixen or Losmandy bar over the PLUS support rings (right).



EAGLE has been entirely designed with three-dimensional design software SolidEdge in order to offer the maximum modularity with the PLUS elements (dovetail bars, rings or dovetail clamps) and/or other brand's telescopes.


CONNECTION AND POWER CABLES 

In order to make the Eagle system more efficient, we have made special power cables for different mounts or CCD cameras. The Eagle-compatible power cables present on one side of instrument power jack (for 12V power). On the other side they have the plug with Eagle screw in order to prevent being disconnected accidentally from the Eagle. We also provide certified USB cables with various lengths to customize your system according to the imaging and guide telescope you want to use . If the cable for your equipment is not present among the optional accessories, contact us and we will make it for you . Cables already available:

- Eagle-compatible power cable for SkyWatcher AZ-EQ6, N-EQ6, HEQ5, AZ-EQ5 and EQ5 SynScan mounts

Eagle-compatible power cable for iOptron CEM25, CEM60 and ZEQ25 mounts

Eagle-compatible power cable for QHY CCD cameras

Eagle-compatible power cable for Atik CCD cameras

- Eagle-compatible power cable for Moravian CCD cameras

Eagle-compatible power cable for PrimaLuceLab cooled cameras

- Eagle-compatible power cable for accessories with cigarette plug

Eagle is also the perfect system to connect the SkyWatcher SynScan computerized mounts directly to Eagle using the EQMOD compatible cables and therefore bypassing the SynScan handpad (Eagle, using a special software, directly controls the mount without the handpad). Then we offer EQMOD USB cables that allow you to connect Skywatcher AZ-EQ6, N-EQ6, HEQ5 and EQ5 SynScan SynScan to one of the USB ports of Eagle.

You can find all the cables in the Eagle-compatible accessories line.

 



 

DIMENSIONS:

Physical external dimensions (in millimiters) of the EAGLE with the position of the threaded holes
(M6 in the bottom part to connect to support rings or dovetail clamps and plates, M5 in the upper part to connect to PLUS guide rings).

Thanks to the EAGLE you will be able to setup your telescope in no time and to power it with a small and compact battery (optional ALL NIGHT 20A battery in the picture) also avoiding the battery cables to touch the ground.

 

 

 

  


EAGLE: Apollo 11 lunar module

The Apollo Lunar Module (LM), originally designated the Lunar Excursion Module (LEM), was the lander portion of the Apollo spacecraft built for the US Apollo program to carry a crew of two from lunar orbit to the surface and back. EAGLE is the name of Apollo 11 lunar module that, on July 20, 1969,  landed the first humans on the Moon, Americans Neil Armstrong and Buzz Aldrin.

from: Wikipedia (picture: Eagle LEM on the Moon - NASA Apollo Archive)

 

  • 상기 가격은 환율에 의해 상시 변동될 수 있습니다.
  • 배송비 : 기본배송료는 2,500원 입니다. (도서,산간,오지 일부지역은 배송비가 추가될 수 있습니다)  80,000원 이상 구매시 무료배송입니다.
  • 본 상품의 평균 배송일은 7일입니다.(입금 확인 후) 설치 상품의 경우 다소 늦어질수 있습니다.[배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과는 차이가 발생할 수 있습니다.]
  • 본 상품의 배송 가능일은 7일 입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다. (단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)
  • 상품 청약철회 가능기간은 상품 수령일로 부터 7일 이내 입니다.
  • 상품 포장 제거 또는 개봉으로 상품 가치 훼손 시에는 7일 이내라도 교환 및 반품이 불가능합니다.
  • 고객 변심에 의한 교환, 반품은 고객께서 배송비를 부담하셔야 합니다(제품의 하자,배송오류는 제외)
  • 일부 상품은 신모델 출시, 부품가격 변동 등 제조사 사정으로 가격이 변동될 수 있습니다.
  • 개별 주문제작상품의 경우에는 제작완료, 인수 후에는 교환/반품기간내라도 교환 및 반품이 불가능 합니다.
  • 일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오.

상호명 : (주)에스엘랩 | 대표이사 : 김정현 | 사업자등록번호 : 409-87-00246
통신판매업신고번호 : 제2015-서울강동-1742호 | 주소 : (05407)서울특별시 강동구 양재대로85길 77 2층
전화번호 : 02-416-0376 | 팩스번호 : 02-6974-1737 | 메일 : master@sllab.co.kr